uitleg van de error codes

uitleg van de error codes discussie in iPhone algemeen forum; ( verdwijnt na registratie ) Most of the errors can be found at Apple's Knowledge Base . Here is a list of iTunes errors that could appear during a restore ...



Ga terug   iPhone, iPod touch, iPad en Apple TV forum > iPhone > iPhone algemeen
Wachtwoord vergeten? Registreren!
Registreer FAQ Ledenlijst Kalender Zoeken Berichten van vandaag Markeer forums als gelezen
  #1  
Oud 19 October 2011, 09:06
» iPhone 3GS 32GB (Wit) [FW: 5.0]  [Jailbreak: Nee]
» Ik heb geen iPad  
» Windows
 
Geregistreerd: 19 October 2011
Locatie: Brugge ( Belgie)
Berichten: 2
Standaard uitleg van de error codes

Most of the errors can be found at Apple's Knowledge Base. Here is a list of iTunes errors that could appear during a restore or a USB connection via iTunes:
Negative -98xx

Error -9843

This error happens if you are logged out, try to download something from the iTunes store and if you click on "Download" and enter an account, which doesn't have this article, this error will occur.
Error -9815

Set exact date, restart computer. See also Apple's KB article.
Error -9814

Set exact date, restart computer. See also Apple's KB article.
Error -9812

Check system time, reset Internet connection, update root certificates. See also Apple's KB article.
Error -9808

Computer system time incorrect.
Error -9800

Set exact date, restart computer. See also Apple's KB article.
Negative -50xx

Error -5000

There is a problem with the permissions of the Mobile Application folder. The App you've tried to download in iTunes couldn't be saved.
Negative -32xx

Error -3259
  • Connection timeout, try again.
Error -3198
Negative -1 ... -100

Error -50

Delete Storm Video, QuickTime, iTunes, then reinstall iTunes. See also Apple's Knowledge Base article number TS1583.
Error -35

Error when downloading songs purchased on iTunes. Also see Apple's Knowledge Base article number TS1475.
Error -1

Error occurs when one uses the "last ditch" method for preventing baseband updates on the iPhone 4. The baseband does not get updated using this method. Use TinyUmbrella to kick it out of recovery mode.
Below 100

Error 1
  • You are attempting to downgrade an iPhone from iOS 5 to iOS 4.x. To resolve, use either custom firmware created by PwnageTool/sn0wbreeze or use notcom's FixRecovery utility available on his site.
  • On an iPhone 4 downgrading from iOS 5, use the option in TinyUmbrella to allow a baseband "upgrade" to bypass the error and go back to basband 4.10.1.
  • Unable to downgrade. Try changing the USB port (the back one of chassis is better) and restart computer.
  • The installed version of iTunes may also be too old. Update iTunes.
Error 2
  • ASR does not exist on ramdisk or is corrupt/not signed.
  • sn0wbreeze 1.6 Custom Firmware has a ASR patch problem. Use sn0wbreeze 1.7+ or PwnageTool. Device isn't bootable.
Error 6

Not enter the downgrading mode, change USB port (the back one of chassis is better) and restart computer.
Error 9
  • Due to asr being patched, the SHA signature is automatically changed and after being resigned the kernel will refuse to use it. Therefore proper kernel patches are required. If necessary kernel patches are not applied, it will fail to load asr and error 9 would occur during restore.
  • Rebooting your Mac or PC may resolve this issue.
Error 10

LLB is missing from the IPSW. The device cannot be booted up. The trick to skip the baseband update no longer works.
Error 11
  • Removed BBFW file in the firmware folder of an unzipped IPSW. Can also be used to prevent a baseband update. The device is bootable, if you set the auto-boot to true or use TinyUmbrella and use "Kick Device out of Recovery".
  • You are trying to update to a custom firmware from PwnageTool 4.1+. You always have to go into DFU mode and restore from there.
Error 13
  • Occurs when you want to install a beta firmware with iTunes for Windows (actively blocked by Apple; beta users are developers and therefore must have a Mac).
  • USB problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
  • The installed version of iTunes may also be too old. For firmwares 4.0 and higher you need iTunes 9.2 or higher. Update iTunes.
Error 14
  • Custom firmware update fail (PwnageTool until 4.0.1). You have to restore the device with a custom firmware. Update to a custom firmware isn't working. Device isn't bootable. 2
  • USB Problem. Check the USB connection and try other direct ports or maybe the USB cable is an older one. Device isn't bootable.
  • You're trying to 'update' to a beta firmware instead of performing a restore. Device is still bootable if you kick it out of recovery mode.
  • Rebooting your Mac or PC may resolve this issue.
Error 17
  • Device failed to display the applelogo img3 which results in this error.
  • One or more of the nand0/nor0 flash images were missing from the IPSW.
Error 18

This occurs when the media library on the device is corrupt and cannot be modified or updated.
Updating to the latest version of iTunes and then restoring should resolve this issue
Error 20

Reportedly happens during failed downgrade attempts (iOS 2.0 to 1.1.1, 5 beta to 4.3.3).
Some have seen success afterwards by doing the downgrade from DFU mode instead of the normal Recovery mode.
Error 21

Custom firmware restore fail (PwnageTool since 4.1). You have to put your device into the DFU mode and not into recovery mode. Device won't boot correctly an stuck at the Apple logo after the error. Press and hold power and home button until it reboots.
Error 23


Cannot restore or update due to hardware problems.
  • In software you have to set default web browser.
  • In hardware, it's a communication problem. Check all connections, also try to change battery.
  • Faulty baseband flash or processor
  • Happens frequently after water damage. Remove and clean motherboard.
Error 26
  • Values or variables in the options property list within the ramdisk are incorrect.
  • False version of the NOR flash firmware. Use the correct sn0wbreeze version.
Error 28
  • Hardware error. Return your device to Apple if possible. The problem is a bad dock connector on the iPhone. Must change the connector.
  • If you have tried almost everything, reset the logic board (leave uncharged for five days or remove battery for half an hour), then pwn and restore. If this doesn't work, the flash memory/hard drive of your device is damaged.
Error 29

See Apple's discussion thread number 2329795 about this problem. You might need to change the battery.
Error 31

Main Article: DFU Loop


Error 34

Hard disk is run out of space when trying to download. Clear space and then continue downloading.
Error 37
Error 40

Hacktivation bug in Sn0wbreeze 2.0.1, which was fixed in Sn0wbreeze 2.0.2.
Error 46

?
Errors 10xx

Error 1002

Error when restoring.
Error 1004

This is caused by a failure to match the Baseband Nonce currently in memory to the nonce returned in the Baseband Firmware SHSH blob. This happens if you edited the hosts file (Saurik's Server) or you are using TinyUmbrella. Use TinyUmbrella and "Kick Device Out Of Recovery" to boot. 1
Error 1011

This is caused by recovery mode being in userland (1.1.1 firmware). The file iTunesMobileDevice.dll is damaged or updated.
Error 1013
  • iPhone 4
    • This means that the baseband did not get updated. Either remove the gs.apple.com entry from your hosts file and let the baseband upgrade or if you want to preserve the baseband just jailbreak at this point to boot it up.
  • Other Devices
    • Restart computer; change computer; reinstall system, if the device is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone 2G with 1.0.2 firmware downgraded from 1.1.1)
Error 1014

This occurs when you try to downgrade your device's baseband.
Error 1015

This error is common when downgrading iPhones and 3G-enabled iPads. The problem occurs when the device's baseband has a higher version number than the baseband in the firmware you restored to. Just set auto-boot true in iRecovery or use iREB/TinyUmbrella/RecBoot.1
Errors 13xx

Error 1394

When Spirit2Pwn flashes parts of the boot chain on iOS 4, the device may crash into DFU Mode.[1]
Errors 14xx

Error 1413

Restart computer; change USB port; reinstall system. See also Apple's Knowledge Base article number TS1927.
Error 1415

Restart computer; change USB port; reinstall system.
Error 1417

Restart computer; change USB port; reinstall system.
Error 1418

Restart computer; change USB port; reinstall system.
Error 1428

Restart computer; change USB port; reinstall system. (downgrade from www.iphonebus.com)
Error 1050

Bad response from gs.apple.com OR need iREB for preparing the device for restoring to custom IPSW
Errors 16xx

Error 1600

Custom firmware can't be restored on a device with DFU Mode. The software of the iPhone isn't patched. Using iREB, sn0wbreeze, redsn0w, or PwnageTool, you need to enter a pwned DFU Mode. During that process the software gets patched and the custom firmware should run without any problems.
Error 1601

See also Apple's Knowledge Base article number TA38633.
Error 1602
  • Restart computer; change computer; reinstall system.
  • If this error occured during an Apple TV restore, then unplug the Apple TV from the power cable, after you entered the recovery or DFU mode, and then try it again.
Error 1603

False kernelcache patch. Known on damaged bundles from unofficial PwnageTool distributions or bundles. See also Apple's Knowledge Base article number TA38604
Error 1604

Device was not pwned (signature checks were not blocked). Custom firmware can't be restored. Can also happen when there's a problem with the IPSW.
Error 1611

iTunes tried to enter the Restore Mode, but the device turned back to the Recovery Mode. This can happen when updating an iPad 2 jailbroken with Saffron gets updated to iOS5. In this case simply retry, as it is in Recovery Mode then anyway.
Error 1618

Missing system files or corrupt data in iTunes installation. Try to uninstall iTunes, restart computer, install again.
Error 1619

iTunes is too old and couldn't read the iPhone in Recovery or DFU Mode. Please update iTunes and try it again.
Error 1644

IPSW was moved during prepare with iTunes. Try it again and don't move the IPSW.
Errors 20xx

Error 2001
  • The Mac OS X kernel extension "IOUSBFamily" that was bundled with late 2008 / early 2009 MacBooks, as well as the 10.5.6 update, has a bug where it fails to properly recognize an iDevice in DFU Mode. It can be resolved by updating to 10.5.7 (or later), or using a USB hub.
  • Close limera1n.
Error 2002

iTunes can't connect because another program is using it or it's disconnected during the Apple Server check.
Error 2003
  • Connection problem; change USB cable and check USB port.
  • sn0wbreeze failed to restore IPSW; unplug and plug iDevice and try again
Error 2005

Problem connecting. Probably a hardware failure.
Error 2006

Replace the USB cable with a newer one and/or disconnect all other USB devices, then retry.
Errors 30xx

Error 3002
  • Update to an older firmware isn't working, because Apple is no longer handing out SHSHs for the device/firmware combination.
  • Or a timeout checking Apple server - retry later.
  • This error also happens if you try to Update with a local TSS server (TinyUmbrella tool) and probably also when connecting to Cydia Server. Use Restore instead.
Error 3004
  • No internet connection during the firmware restore.
  • iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.
Error 3014
  • Bad hosts file. The SHSH request couldn't be completed. No connection to the Apple Server, Cydia Server or localhost (for TinyUmbrella.
  • iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.
Errors 31xx

Error 3123

Something dealing with movie rentals.
Error 3191


QuickTime may be corrupted. You must reinstall it before iTunes will work. Windows users, also try turning off Compatibility Mode for QuickTime.
  1. Right-click on "C:\Program Files\QuickTime\QuickTimePlayer.exe" ("Program Files (x86)" for 64-bit Windows) and choose Properties from the shortcut menu.
  2. In the Properties window, click on the Compatibility tab. Deselect the checkbox labeled “Run this program in compatibility mode for.”
  3. Click Apply.
  4. Close the Properties window
Error 3194

Occurs when trying to install an old firmware and Apple's server disallows the installation. The only solution is to have SHSH backup and modify the hosts file to point to Saurik's Cydia Server where they are backed up (or localhost if you have it yourself).
Error 3195
  • There is no SHSH for the firmware.
  • This is the same as "This device isn't eligible for the request build." but with an cache error.
Errors 32xx

Error 3200

You are trying to update to iOS 5, when infact, the IPSW file has only a Restore Ramdisk.
Errors 90xx

Error 9008
  • Error downloading, try again.
Higher Errors

Error 11222

A security software you have installed may be conflicting with iTunes.
Error 13019
  • Seems to be an issue with syncing media to the device... It only seems to happen on jailbroken devices. Create new user, try syncing with new user's library. If that fails, restore. If it doesn't fail, then something on YOUR iTunes Library is causing the error.
  • In iOS 3.0~3.1.0 this was a known bug related to the sync process accessing iTunes-renamed Voice Memos.
Error 20000
  • Is caused by a custom theme pack on your Windows. Use default Theme.
  • This error can also be caused by the iDevice rebooting during the "Extracting Firmware" stage of restore.
Error 20008

?
This happened on a Mac with TinyUmbrella running before resotring a firmware to the Apple TV.
Hex Codes

0xE800000F

Unknown error
0xE8000001

Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again
0xE8000022

Error in your firmware files. Restore.
0xE800003D

False permissions in the Carrier Bundle folder. Restore, update or fix the permissions from the carrier bundle to update the carrier settings via iTunes.
0xE800006B

Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again.
0xE8000065

sn0wbreeze custom firmware error on USB connection. Unplug the device, reboot it, and plug it in again.
0xE8008001

Main Article: MobileInstallation
IPA signature verification failed.
Advertentie
Advertentie Gesponsorde links (verdwijnt na registratie)

Reageren


Er zijn 1 actieve gebruikers die momenteel deze discussie bekijken (0 leden en 1 gasten)

 
Discussietools
Weergave

Soortgelijke discussies

Discussie Auteur Forum Reacties Laatste bericht
Een duidelijk uitleg van het jailbreaken van Versie 4.0? Yordi038 Jailbreak 1 29 June 2010 19:49
Windows: iTunes 1600 error codes ih8fapplenow iTunes 1 6 March 2010 18:39
uitleg over onderdeel van de hacking? vincent Archief 1 14 October 2007 09:38

Regels voor berichten
Je mag geen nieuwe discussies starten
Je mag niet reageren op berichten
Je mag geen bijlagen versturen
Je mag niet je berichten bewerken

BB code is Aan
Smileys zijn Aan
[IMG]-code is Aan
HTML-code is Uit
Trackbacks are Aan
Pingbacks are Aan
Refbacks are Uit



Alle tijden zijn GMT +2. Het is nu 09:49.